Catalog No.6  

 

Heater for generating the high temp. and high pressure hot-air

 

 Spot heater

 

Gas is heated quickly from the normal temp. to high temp.!
Max. discharge temp. is 800゚C ,  
 Resisting pressure is 0.49MPa.

 スポットヒータ 集合写真
Industry first ! Type that A-sensor and B-sensor were incorporated. (All type)

 
New   Large capacity model of Spot heater
 Electric heater for generating the high temp.

      
SHP40 / SHP50

SHPヒータ 集合写真

MODEL SH01 (Synthesis photo)

MODEL SH31 (Synthesis photo)

 

 

 

     
 

 
Specification
  Model Type Heater capacity / Voltage Usable air volume Price Common specification  
SH01 1100-035K 350W/ Single-phase 100V About 5 - 12L/min

 * Max. hot-air temp. is 800゚C.

 * Hot-start max. temp. is 500゚C. 
     SH01 - 31 : 500゚C
     SHP40, 50 : 300゚C

 * A-sensor (For detecting hot-air temp.) 
 It is incorporated to the heater element.

 * B-sensor (For hot-start, and  heater
      snapping of a wire prevention) 
    It is incorporated to the heater element.

 * Temp. of supply air is 0 - +70゚C.
     
 * Resisting pressure 
    SH01 - 31 : 0.49MPa
    SHP40, 50 : 200kPa


 * Accessories
     Adiabatic cover (SH11, 21, 31)
     Wiring cord 300mm (SH05,11,21)
     Top hold metal fittings (SHP40, 50)

 * Proper auto-temp. controller
     SH01 - 31 : TRC202
     SHP40, 50 : TRC501

1100-055K 550W/ Single-phase 100V
1100-07K 700W/ Single-phase 100V
1200-055K 550W/ Single-phase 200V
SH11 1100-08K 800W/ Single-phase 100V About 10 - 420L/min
1200-06K 600W/ Single-phase 200V
1200-08K 800W/ Single-phase 200V
SH21 1200-1K 1000W/ Single-phase 200V About 10 - 380L/min
1200-1.2K 1200W/ Single-phase 200V
SH31 1200-1.5K 1500W/ Single-phase 200V About 60 - 1000L/min
1200-2K 2000W/ Single-phase 200V
1200-2.5K 2500W/ Single-phase 200V
1200-3K 3000W/ Single-phase 200V
SHP40 3200-4.5K 4.5kW/ 3-phase 200V 4.7m3/min
3200-6.5K 6.5kW/ 3-phase 200V
SHP50 3200-8.5K 8.5kW/ 3-phase 200V 4.4m3/min
3200-10.5K 10.5kW/ 3-phase 200V
 
       
  New function installation ! Auto-temp. controller for spot-heater
Multi-controller TRC202
 
 
* Contact output terminal that the abnormal signal is output is installed with addition.
* Temp. control is improved and the performance of 100% of spot-heater was drawn.

マルチコントローラ TRC202 写真

 
 Specification
 
 * Power supply 
   Single-phase 100V or Single-phase 200V 50/60Hz
  * Heater control capacity 
      Less than single-phase 2kW  (at 100V)
              Less than single-phase 4kW  (at 200V)
 * Max. load current  
   20A (Heater load)
 * Instructions accuracy 
   800゚C plus minus 0.2% FS
 * Control output 
   For heater control (Phase control)
 * Function  
   Outlet hot-air temp.  A-sensor  Normal - 800゚C
   Hot-start temp.  B-sensor  Normal - 500゚C
   Overheat prevention temp.
              (Heater snapping of a wire prevention)  B-sensor  700゚C fixed
   ON/OFF of the heater by the outside signal
   Change of the operation mode by the outside signal
              (Hot-start / Normal operation)
   With contact output terminal
               (Selection from 5 mode of the output terminal function)
   Temp. alarm function
   Auto-tuning function


 
       
  Aut-temp. controller for SHP40 and SHP50
  TRC501
 
 


SHP40・50専用自動温度調節器 TRC501 写真
 

 Specification
 
 * Power supply 
   3--phase 200V or 3-phase 200V ・220V 
50/60Hz
 * Heater control capacity 
   Less than 12kW / 35A  (at 200V)
        
 * Instructions accuracy 
   800゚C plus minus 0.2% FS
 * Control output 
   Zero-cross control (PID action)
 * Function  
   Outlet hot-air temp.  A-sensor  Normal - 800゚C
   Hot-start temp.  B-sensor  Normal - 300゚C
   Overheat prevention temp.
              (Heater snapping of a wire prevention)  B-sensor  700゚C fixed
   ON/OFF of the heater by the outside signal
   Change of the operation mode by the outside signal
              (Hot-start / Normal operation)
   With contact output terminal
              (Selection from 5 mode of the output terminal function)
   Auto-tuning function

 

 

This product corresponds even each voltage


 

To Main menu

 Kansai Electric Heat Corp.  

 

4-18, Takaidanishi 5-chome, Higashiosaka-city 577-8566, JAPAN

 
    TEL : +816-6785-6001   FAX : +816-6785-6002  
    E-mail : sales@kansaidennetsu.co.jp