Catalog No.10-1   

Wide use type Blow nozzle

Air supply inlet was improved, the pressure loss and noise were reduced, and the weight was lightened.
So, this became energy conservation type furthermore.

 

ブローノズル 集合写真

 

Rapid removing water, Drying, Cooling, Even surface treatment, Air curtain

 

ブローノズル 使用例

ブローノズル 取り付けた例

  Example that was attached to the turbo-blower      Example that was attached to the vortex blower

Common specification

Structure

  Resisting pressure : 0.1Mpa
 
  Max. use temp. : 350゚C 
 
  Material : SUS304
 
  Accuracy rating : Disorder of the air-speed of the right and
                                   left is less than  plus minus 3.5%
 
 
Fixation metal fittings are equipped to all the types


ブローノズル 分解写真
 

 

Common specification

MODEL Bore of the air supply inlet Slit width Max. use discharge air-speed Manufactureable length Price
25DS φ25 1.0o 100m/s 100mm -  300mm
  65m/s 100mm -  400mm
1.5o   65m/s 100mm -  300mm
  45m/s 100mm -  400mm
38DS φ38 1.0o 100m/s 300mm -  600mm
  65m/s  300mm -  1000mm
1.5o   65m/s 300mm -  600mm
  45m/s  300mm -  1000mm
50DS φ50 1.0o 100m/s  600mm -  1000mm
  65m/s  600mm -  1500mm
1.5o   65m/s  600mm -  1000mm
  45m/s  600mm -  1500mm
2.0o   50m/s  600mm -  1000mm
  35m/s  600mm -  1500mm
65DS φ65 1.0o 100m/s 1000mm -  1500mm
  65m/s 1000mm -  2000mm
1.5o   65m/s 1000mm -  1500mm
  45m/s 1000mm -  2000mm
2.0o   50m/s 1000mm -  1500mm
  35m/s 1000mm -  2000mm

 

                  Pen nozzle

   

For the compressor

 

DS

ペンノズル 集合写真

ペンノズル スリット部拡大写真
 

Strong air-speed of 200 - 400m/s is obtained within less than 10mm from the discharge slit by using a little compression air.

 
This is made of all stainless steel. High efficiency can demonstrate, and there is not the resonance sound that occurs from the pen nozzle at all.

 
This is used even for the air amplifier by supplying the compression air of the compressor (pressure 10.17MPa).

Heatproof temp. is 350゚C.

 

Common specification

Straight slit

MODEL PEN50 PEN75 PEN100 PEN125 PEN150 PEN175 PEN200 PEN250 PEN300
Slit width 0.2mm
Form of the air supply inlet R 1/4 (8A) Screw of  the piping R 3/8 (10A) Screw of the piping
Slit length 50mm 75mm 100mm 125mm 150mm 175mm 200mm 250mm 300mm
Price

 
Oblique slit
MODEL PEN50B PEN75B PEN100B PEN125B PEN150B PEN175B PEN200B PEN250B PEN300B
Slit width 0.2mm
Form of the air supply inlet R 1/4 (8A) Screw of  the piping R 3/8 (10A) Screw of the piping
Slit length 50mm 75mm 100mm 125mm 150mm 175mm 200mm 250mm 300mm
Price

 

Specification may be changed without notice because the performance is improved.

To Main menu

 Kansai Electric Heat Corp.  

 

4-18, Takaidanishi 5-chome, Higashiosaka-city 577-8566, JAPAN

 
    TEL : +816-6785-6001   FAX : +816-6785-6002  
    E-mail : sales@kansaidennetsu.co.jp