Catalog No.10-3  

Low pressure loss ! Low cost ! Light !

 

Highly efficient

 

 High-blow nozzle SUS

 

Compressor and high pressure blower are not necessary !!
Discharge air-speed 100m/s is materialized by the turbo-blower.

 
 
 

Rapid removing water

 
Rapid drying
 

Powder body
removal

 

Air curtain

 

Even surface treatment

 

Cooling

 

Drying before ink-jet

 

Condensation removal

 

 

 

Simple inside rectification structure

   

Slit width adjustment type

 
 

   

 
 

Material is adopted stainless steel (SUS304 Surface finish 2B).

   

Hexagon stick spanner for the adjustment of the slit width is equipped.

 
 

 

   

 

 

Specification

MODEL

65SUS 75SUS 100SUS 125SUS
Bore of inlet φ65 φ75 φ100 φ125
Adjustment range of slit width 0.5 - 2.0mm 0.5 - 2.0mm 0.5 -  3.0mm 0.5 - 4.0mm
Manufatureable slit length Slit length 300mm - 1900mm
      at slit width 0.5mm - 1.0mm
Slit length 300mm - 1000mm
      at slit width 1.1mm - 2.0mm
Slit length 300mm - 1900mm
      at slit width 0.5mm - 1.0mm
Slit length 300mm - 1500mm
        at slit width 1.1mm - 2.0mm

500mm - 2300mm

500o〜2300o

Efficient use air-speed

25 - 120m/s at slit width 1.0mm
25 - 100m/s at slit width 2.0mm
50 - 150m/s at slit width 1.0mm
25 -  80m/s at slit width 2.0mm
50 - 150m/s at slit width 1.0mm
25 - 80m/s at slit width 2.0mm
25 - 50m/s at slit width 3.0mm
25 - 150m/s at slit width 1.0mm
25 - 100m/s at slit width 2.0mm
50 - 100m/s at slit width 3.0mm
50 - 75m/s at slit width 4.0mm
Heatproof temp. Less than 350゚C
Resisting pressure Less than 49kPa
Accuracy rating Disorder of the air-speed of the right and left is less than plus minus 5%  (Except the both ends department 25mm of slit)
Price

 

Specification may be changed without notice because the performance is improved.

To Main menu

 Kansai Electric Heat Corp.  

 

4-18, Takaidanishi 5-chome, Higashiosaka-city 577-8566, JAPAN

 
    TEL : +816-6785-6001   FAX : +816-6785-6002  
    E-mail : sales@kansaidennetsu.co.jp